Calculation basis and interpretation
The model estimates mean residence time for a simple rotary cylinder using the measured or justified material angle of repose and kiln inclination. It is not a calibrated residence-time distribution for a cement kiln with lifters, end dams or changing material state.
- Residence time: Sullivan et al. empirical relation, with slope in degrees.
- Material hold-up: entered feed rate (t/hour) multiplied by estimated residence time (hours).
- Implied volume fill: estimated hold-up divided by the entered bulk density and geometric kiln volume.
- Feed intensity: all throughput figures use the entered kiln feed, not produced clinker.
Compare model outputs with mass-balance checks, representative samples and OEM or validated plant calculations before making operating adjustments.