Urgent Accident Acc Chanda clinker silo Collapsed !! kindly discuss the reasons !! Help!

Previous Post
Next Post

Contents

Urgent Accident Acc Chanda clinker silo Collapsed !! kindly discuss the reasons !! Help!

 

our Page always share practical advice and tasks , where you can finish reading the post and begin instantly to apply what you have learned from this post , if you want to download all the practical manuals and notes from most successful companies in the world click here now 

 

 

 

our Page always share practical advice and tasks , where you can finish reading the post and begin instantly to apply what you have learned from this post , if you want to download all the practical manuals and notes from most successful companies in the world click here now 

 

 

our Page always share practical advice and tasks , where you can finish reading the post and begin instantly to apply what you have learned from this post , if you want to download all the practical manuals and notes from most successful companies in the world click here now 

 

 

 

 

 

 

 

 

 

our Page always share practical advice and tasks , where you can finish reading the post and begin instantly to apply what you have learned from this post , if you want to download all the practical manuals and notes from most successful companies in the world click here now 

Previous Post
Next Post

8 thoughts on “Urgent Accident Acc Chanda clinker silo Collapsed !! kindly discuss the reasons !! Help!”

  1. Kunal singh bisen

    Generally can’t say about collapse without see before collapse condition or drawing of silo.

    1. 1)Clinker may be accumulated on top silo. Frequent cleaning required to reduce the load.
      2) Frequent welding koints welding condition to be checked. Because DDPC pulling forces will be there.
      3) Hot clinker fumes will be there and MS martial will be weakened. Anti Rusthe paint to be done every year.
      4) Centre shafts design shall be there being a structural roof. By central shafts design fugitive dust can be avoided and it will not harm the steel stuctures.
      P. MuralI Mohan , 9493411892.

  2. Vijai Kumar Jain

    During last on decade, number of clinker silo roof had collapsed.

    There is no point in beating the BUSH?

    Main reason of failures are concluded due to poor structural fabrication and erection at plant sites.
    Since the plant owner engineers are reluctant to carry out the required stage inspection during Fabrication and Erection; DUE TO HEIGHT.

    It is human nature that the engineers are not carrying out the desired quality checks due to climbing at the heights.

    These job are left to the mercy of fabrication & erection contractor.

    All the mechanical contractors are normally deploying the welders, WITHOUT CHECKING THEIR WELDING SKILL?

    It is MANDATORY that such structures at various heights, Welders must be qualified and the welding quality is to be TESTED prior to deploying them on any erection jobs at height.

    I hope that the explanation will suffice the diagnosis of this failure.

  3. Anil K Banchhor

    There have been many solos constructed with similar designs and still functioning. There are three main reasons
    1. Sliding bearing of deep pan conveyor is jammed due to dust Accumulation , leading to Thrust from supported pan conveyor.

    2. Overfilling of silos with hot clinker up to truss level leading to sagging of crucial bracing members. There is no camera inside to monitor the stock level inside.
    3. During erection phase, many weldings are done at roof level bracings by welders. Hence quality may get compromised apart from missed out welding. There are many silo roofs which are assembled ( about500mt) at ground level and lifted to final position with the help of lifting stations. ACC wadi clinker silo and L&T Tadpatri such lifting was done.
    I was involved in construction of many cement plants.
    Anil Banchhor

  4. Possible reasons could be,
    1. Too much spillage / poor maintenance at DPC silo inlet side.
    2. Dust accumulation
    3. Heat abrasion
    More details with photos prior to accident, drawings, age of silo can help see through appropriate things.

    Silo roof collapse are getting more common these days.

Leave a Reply