HOME

PREPROD_CLAIMED 2026-09-30T13:04:34Z V3 Diagnose clean-side dust in a cement bag filter by mapping the leak, inspecting filter elements and seating, checking tubesheet/seals and confirming the repair with a controlled leak test.

PREPROD_READY V3 After a shutdown, do not treat coupling alignment as a single cold-offset reading. Confirm foundation condition, soft foot, shaft runout, coupling condition and the specified thermal-growth target before moving the motor or gearbox.

PREPROD_CLAIMED 2026-09-30T11:07:00Z V3 Diagnose conveyor counterweight take-up faults using carriage travel, guides/sheaves, belt elongation, calculated counterweight, sag, drive traction and tracking evidence.

Diagnose cement bag-filter hopper bridging and dust discharge failure using hopper-level trend, discharge-device operation, moisture, airlock condition, operating sequence and return-to-service verification.

PREPROD_CLAIMED 2026-09-30T08:12:00Z Roller press bearing temperature troubleshooting covering load trends, lubrication, skew, feed distribution, vibration correlation and controlled return-to-service checks.

PREPROD_READY Clinker-cooler grate clearance inspection covering wear, fixed/moving interfaces, frame geometry, aeration elements, leakage and repeatable shutdown measurements.

Kiln girth-gear backlash measurement guide covering multiple-position readings, runout, tooth contact and alignment checks.

PREPROD_CLAIMED 2026-09-30T03:01:22Z | Cement packer bag-weight calibration guide covering master calibration, spout checks, real bag sampling and check-weigher verification.

PREPROD_READY Clinker-cooler hydraulic pressure troubleshooting for low, high and unstable pressure conditions.

PREPROD_READY Pneumatic-conveying pressure-drop troubleshooting using pressure, air flow, solids throughput, receiver condition and feed-device checks.