How to Use This Calculator
- Select material density: cement=94, limestone=85, coal=50, clinker=80 lbs/ft³ or use presets (Light/Medium/Heavy)
- Enter elevator height: and choose a bucket size preset
- Adjust parameters if needed: speed, spacing, bucket dimensions, and fill %
- Click Calculate: use OEM rated bucket volume to estimate STPH and metric TPH; see ideal material-lifting power, not final motor size
Bulk Material & Presets
Cement=94, Limestone=85, Coal=50, Clinker=80
Presets:
Bucket & Drive Parameters
Required: actual rated bucket volume, not A × B × C envelope
Typically 75% of 100% full
Capacity is based on OEM rated bucket volume, fill factor, material bulk density, spacing and speed. Ideal material-lifting power excludes mechanical losses, chain or belt mass, acceleration, start-up and safety margins. Confirm final elevator and drive selection with the equipment manufacturer.