Vintage IFA, Ural, KrAZ & ZIL Truck Spare Parts | 1950s–1990s Obsolete Parts

▣ SPECIAL SERVICES — Explore every custom engineering solution

Concept illustration: vintage Eastern European trucks, gears, steering parts, clutches and restoration workshop

Worldwide civilian restoration & specialist spare-parts sourcing

Vintage IFA / EFA, URAL, KrAZ & ZIL Truck Spare Parts

Hard-to-find, obsolete and one-off replacement parts for historic Eastern European trucks, including 1950s and 1960s models and later classic fleets. Small quantities welcome. Engineering and reverse-engineering sourcing available.

Request a part quotation — [email protected]

One missing part should not immobilize a historic truck. We coordinate independent specialist sourcing, machining, fabrication, castings, custom seals and repair solutions from Egypt for overseas civilian vehicle owners, collectors, restorers and workshops. We will evaluate one-piece enquiries, discontinued designs and mixed-model conversions. No fixed minimum quantity to request a feasibility assessment; manufacturing price, tooling and shipping depend on the actual part.

IFA / EFA / DDR truck spare parts — W50, L60, G5, S4000, H6

IFA is the historical East German truck brand. Some enquiries use the spelling “EFA”; please supply the vehicle badge or photograph if uncertain. The W50 dates from 1965 onward and is not a pre-1960 model. Earlier DDR vehicles include H6, S4000 and G5.

  • IFA W50 and L60 cab trim, dashboard parts, cabin lining, body panels, storage boxes (Staukisten), seals and rubber mountings.
  • Custom radiator and cooling assemblies for restored vehicles or documented engine conversions.
  • Gearbox, differential and transfer-case component sourcing; bearings, shafts, gears and mechanical linkages after drawing/part verification.
  • W50 cab repair panels, brackets, door fittings, hinges and sheet-metal fabrication, plus reference-based one-off reproductions.
  • Historic IFA H6/G5 steering-related parts, including steering-knuckle sliding components, subject to material and safety qualification.

Deutsch: IFA W50 Ersatzteile, IFA L60 Ersatzteile, DDR LKW Ersatzteile, IFA G5 / H6 Teile, Fahrerhaus-Innenverkleidung, Staukisten, Kühler, Lenkungsteile und Sonderanfertigungen. Wir prüfen Einzelstücke anhand von Fotos, Zeichnungen oder Musterteilen. Anfrage per E-Mail: [email protected].

ZIL / ZiL spare parts — ZIL-157, 164, 130, 131 and heritage models

  • ZIL-157 and ZIL-164 era spare-part identification, unavailable steel brackets, machined fittings and service replacement components.
  • ZIL-130 and ZIL-131 engine and cooling-system part sourcing, custom radiator fitment after measurements, hose connections and mounting verification.
  • Cab sheet metal, front grille, bonnet/hood, mudguards (fenders), mirror supports, interior accessories and custom replacement trim.
  • Drive shafts, transmission shafts, couplings, gear or bearing specification checks, including mechanical rebuild feasibility.
  • Low-volume washer-fluid reservoirs, dashboard plastics and unusual molded components copied from approved physical samples.

Special situation: If a ZIL-131 has been converted to an IFA W50 engine, a standard ZIL radiator may not fit. We can evaluate a custom cooling assembly from the engine cooling requirements, dimensions, mounting points and inlet/outlet geometry. We do not assume a direct interchange.

URAL spare parts — Ural-375 / 375D, 4320 and earlier restorations

  • Ural-375D engine, cooling, drivetrain and axle part searches against an exact serial or reference sample.
  • Obsolete oil-dipstick assemblies, special brackets, fuel-system metal components, hose fittings, and control linkages.
  • Truck storage compartments, unusual rounded metal boxes, mounting fixtures and stamped sheet-metal enclosures.
  • Steering, brake and driveline components can be reviewed only with controlled dimensions, material properties and safety checks.
  • Older UralZIS-related civilian restoration enquiries evaluated separately, with no assumption that 375/4320 parts interchange.

KrAZ spare parts — KrAZ-214, 255, 257, 260 and classic heavy trucks

KrAZ was built in Kremenchuk, Ukraine. Identification of older YaMZ-engined variants and driveline assemblies requires model, year and part number, not brand name alone.

  • Cab reconstruction panels, corrosion-repair sheet metal, glass surrounds, door and hinge fittings.
  • Custom shafts, machined gear components, flanges, adapters, bushings and bearing housings.
  • Mechanical transmission, transfer-case, axle and cooling-related component searches or rebuild assessments.
  • Small-batch rubber, gasket, seal, hose and accessory reproductions where original parts are obsolete.
  • Historic civilian vehicle restoration support and first-article inspection plans for sample-based components.

Hard-to-find part categories we can investigate

Engine & coolingGearboxes & transfer casesDifferentials, axles & shaftsSteering, brakes & suspensionCab, body & sheet metalCab trim, rubber & plasticsIndustrial seals & bearingsRadiators & special conversionsCustom molded, cast or machined parts

Why an obsolete-parts request is different from buying a stock part

We compare three possible solutions: original-compatible sourced spare, technically accepted replacement, or reverse-engineered manufacture. A sample-based replacement may require dimensional metrology, heat treatment, alloy identification, casting-pattern design, machining, tooling or validated testing. We quote one-time engineering/tooling separately from the recurring unit price. Safety-critical systems may require additional engineering evidence or independent certification; some requests will not be feasible.

Request a hard-to-find truck part — 1 piece or a batch

Send the vehicle brand and exact model, year, chassis/engine number where relevant, OEM part number if known, original part photographs or measurements, requested quantity, delivery country and urgency. For critical parts, include the OEM data or approved acceptance specification. We will return a feasibility or sourcing response before any binding price promise.

Email: [email protected]

Email photos, part number & destination

Frequently asked questions

Do you have every ZIL, Ural, KrAZ and IFA part in stock?

We can evaluate sourcing or manufacturing across these families; no claim of existing stock is made until the item is identified and confirmed. Obsolete parts and unusual vehicle variants may require research, reverse engineering or a replacement proposal.

Can you supply just one piece?

Yes, single-piece enquiries can be evaluated. Final manufacturing feasibility, one-off tooling cost and export freight may make some orders uneconomic; we will explain that before accepting an order.

What if the truck has been modified or fitted with another engine?

Supply the modified engine identification, current part photographs and measured interface constraints. Model-only fitment assumptions will not be used for converted vehicles.

Can you reproduce a broken casting or gear?

We can investigate approved CAD or samples, material testing and a suitable foundry/machining route. Structural or safety-critical repairs require validation and may be rejected if safe performance cannot be established.

Can you deliver internationally?

International enquiries are welcome, subject to shipping feasibility, payment, destination customs, export controls, sanctions and any end-use or end-user restrictions. We do not supply prohibited military or sanctioned end uses.

Independent aftermarket engineering: Not affiliated with, endorsed by, or authorized by any named vehicle manufacturer unless expressly established for a transaction. Brand names are used for application identification. Images are illustrative concepts, not photographs of supplied stock or finished projects. No unconditional claim of interchangeability, compliance, repairability, stock, delivery or price is made.

SPECIAL SERVICES — Explore all custom engineering categories

10 Essential Cement Plant Calculations

Free PDF — clinker chemistry, kiln sizing, ball mill power, and more. Enter your email and we'll send it immediately.

No spam. Unsubscribe anytime.

Check Your Inbox

Your PDF is on its way. Plus 6 more emails with cement plant tips and case studies.